Single Phase To 3 Phase Converter

Thousands of Australians, particularly in rural Australia, do not have access to reliable 3 phase power.

Much Less Expensive

Most commercial machinery over a few kilowatts is designed to operate on 3 phase power. Reason being 3 phase motors are more reliable, much less expensive, more readily available, have a much better starting capability, run more efficiently (e.g. 90 compared to 70%), and last many years longer than their single phase counterparts. Single phase motors are expensive, inefficient and unreliable when compared to 3 phase motors.

Eliminates The Utility Charges

The requirement for larger machinery often means that 3 phase connection is the only option.  In many cases, machine manufacturers do not offer single phase solutions. The Phaser3 power converter is the least expensive way to operate 3 phase equipment wherever utility 3 phase is unavailable or is too expensive to obtain.  The Phaser3 power converter eliminates the utility charges to extend 3 phase power lines and the cost of new supply transformers and power metering. 

The Phaser3 power converter also saves the cost of a new 3 phase switchboard and can usually be installed in less than an hour compared with weeks or even months for a utility line extension.

Phaser3’s can be used on a Single Wire Earth Return (SWER) power supplies. Standard model sizes range from 2.2KW to 37KW and suit any application. The only limiting factor is the size of the single phase supply available.

A Phaser3 power converter is inexpensive to own and operate, is quieter than generator alternatives and is fully portable. Therefore, the availability of a 3 phase power solution offers significantly more options for machining selection.

 Affordable quality 3-Phase

• Australian designed and manufactured
• 3 year guarantee
• Suitable for ANY 3 phase application
• Models form 2.2KW to 37KW (3 to 50HP standard)
• Custom designed industrial Micro-Processor controlled technology
• Micro-processor controlled 9 stage automatic output voltage and
   balance control for stable voltages over the full load range
• ‘ Stress free’ Solid State Capacitor Switching using Industrial
   High-Power Thyristors
• Extremely reliable
• True 3 phase 415V output
• High 95% efficiency
• Automatic Hard Start and Boost Standard
• Delayed Output / Load Contactor Standard
• Improves power Quality through short term over voltage spikes
  and voltage sags
• Balances incoming supply power factor
• Maintenance free
• Designed to minimise power bills
• Comparatively low cost
• Australian C-Tick Approval No N14149.

Optional Extras

PLP can customise converters to best suit the application and can fit or supply additional 3 phase outlets, 3 phase plugs, extension leads, motor rated (D-Curve) circuit breakers, digital or manual timers, soft starters and remote start options for pumping and refrigeration equipment.

Ask PLP for a quote on any modifications required.  Phaser3’s can also be manufactured to suit a genuine 415V 2 phase input which are occasionally found in some rural areas.

Click here to download Phaser3 Brochure